|
|
Post by billo2404 on Jul 31, 2015 23:13:40 GMT
2) riportare a 0.0 il valore delle x e delle y nel centro di gravità perchè con il mouse è impossibile centrarlo.
2) bring back the value of 0.0 x and y in the center of gravity because the mouse is unable to center it.
To quickly answer this one: You can type the numbers in the text fields!
click with your mouse the cursor of the field you want to change and with the arrow keys you can get to the desired value in steps of 0.1
Now I solved the problem of the center of gravity but I have some doubts about other fields of plugin
 in the previous post I put the drawings of my 6dof but I don't know why I put them in fields 1, 2, 3, 4 virtual 3d geometry is all wrong.
Can you tell me why and how to calculate the right values to insert?
By chance I have to convert mm to inches?
the various fields with "?" I don't know what they do and what they mean.
Any further information on them would be very welcome.
Please help me because I'm stuck here and is almost ready to assemble position above simThanks to anyone who wants to help me out |
|
|
|
Post by hexpod on Aug 1, 2015 1:42:32 GMT
You can also modify directly in the .ini file Attachments:
|
|
|
|
Post by vicpopo on Aug 1, 2015 7:16:07 GMT
Will give my setup , already screenshooted but not yet shared
[6DOF_design]
Base_Ratio=1.300000
Platform_Ratio=1.630000
Platform_Height=282.000000
Servo_Arm_length=89.000000
[6DOF_limiters]
Max_displacement=130.000000
Crossing_Sensitivity=20.000000
Knee_Cap_limit=120
Servo_Rotate_Limit=142
[6DOF_input_limits]
Yaw_Limit=32
Pitch_Limit=28
Roll_Limit=28
Surge_Limit=63
Sway_Limit=63
Heave_Limit=63
[6DOF_Center_of_Gravity]
X=0.000000
Y=0.000000
Z=20.000000
[Settings]
SW_Simulation=0
|
|
|
|
Post by Mitch on Aug 4, 2015 18:47:41 GMT
Hi,
I'll see if I can answer a few of the ?
Save INI/Read INI - this saves the settings to the .ini file or reads from a file.
Limiters are there to protect the platform
Correct me if I'm wrong here:
(MAX DEP) Max. Displacement - This limit the displacement of the platform
(CROSS SENS) Crossing Sensitivity ? - I don't know what this does - I'm going to take a guess that it smooths out the transition from plane to plane?
(KNEECAP LIM) KneeCap limit - I think this limits the angle between your actuating arm and the rod, like a kneecap on your leg.
|
|
|
|
Post by billo2404 on Aug 4, 2015 22:24:07 GMT
Thanks guys any information is useful, the more we understand, the better we can get this great plugin  in the meantime some update review for 6dof coupling     engine rotated 90 degrees to have more space and opportunity to get off the platform, covered with carbon rods and set the plugin. It's not optimal but still much better than before. After several tests the best results I got them with levers to 50% incline as in the video. www.youtube.com/watch?v=AR9z-Lw3NToThese are the settings of the plugin  early photos of all mounted |
|
|
|
Post by billo2404 on Sept 20, 2015 23:25:09 GMT
I apologize for the long absence but finally a moment to post some videos.
the first is the result just switched the sim still hikes to calibrate
the second is the first Tuning with speed reduced to 50% and PID-1 5-1 and more human angles
During this time I've enjoyed using it with a little bit and doing some test Xsim.
I set different games but I still find problems with ASSETTO CORSA.
Sono da poco riuscito a far funzionare no limits simulator 2 che è un vero spasso.
I recently managed to run no limits simulator 2 which is a blast.
Now it remains to complete the sim with a fairing over the engines that also connects between them so as to make them more stable.
Soon other video posteròqualche and progress of Simulator
|
|
|
|
Post by billo2404 on Oct 1, 2015 22:40:48 GMT
Hi guys, finally another small step: I mounted the structural part of the hull of the Simulator and I must say that the effect feels all right: faster forces and sudden now returns with more decision because this type of constraint removes all kinds of motor swing over the structure. Here's what it looks like now:  soon veneering and graphics |
|
|
|
Post by clyevo on Oct 2, 2015 0:37:34 GMT
Hi billo what is the maximum angle of your rod end bearing?
|
|
|
|
Post by billo2404 on Oct 4, 2015 2:07:46 GMT
Hi billo what is the maximum angle of your rod end bearing? I don't understand what you mean? the rod ends with flared sleeves I measured but should reach the 40-45 degrees. on the sim I have not tried but also with very large movements have never had no problem Here's a new listing for assetto corsa that I finally managed to make it work and I must say also that I find much more precise movement than project cars. here's to you, hope you like it |
|
|
|
Post by vicpopo on Oct 4, 2015 12:14:32 GMT
Hi billo ,
You are right nice setup.Quick and smooth movements.
For me I have the opposite situation .I have a better feeling with pcars than assetto corsa !
Maybe an update from,the game or l have to tweak a little bit my xsim setup.
|
|
|
|
Post by clyevo on Oct 13, 2015 7:08:01 GMT
I scrolled through the post, i cant find your AMC1280 pid settings and your inverter acceleration and deceleration settings. Pls tell me. Thanks
|
|
|
|
Post by stevant on Oct 23, 2015 0:39:34 GMT
Billo......AWESOME JOB!!!!!!!!!!!!!!!!!!!!!!!!! Bellissimo!!!!
|
|
|
|
Post by snafky on Nov 17, 2015 21:47:35 GMT
Hi Billo
Looking really good your 6Dof!!!!
I have looked through the whole thread and saw multiple picture with measurements of allot on the frame and arms.
SInce i'm in the investigation stage i would like to know if all of these values are correct?
Or have they been changed.
You're type of build (also size wise) is really the thing i am thinking to make.
Are you able to share you're current sizes with pictures you showed before?
At all point i will give you the credits naturally ;-)
Or should these go to somebody else? ;-)
|
|
|
|
Post by billo2404 on Dec 25, 2015 14:47:24 GMT
Hi Billo Looking really good your 6Dof!!!! I have looked through the whole thread and saw multiple picture with measurements of allot on the frame and arms. SInce i'm in the investigation stage i would like to know if all of these values are correct? Or have they been changed. You're type of build (also size wise) is really the thing i am thinking to make. Are you able to share you're current sizes with pictures you showed before? At all point i will give you the credits naturally ;-) Or should these go to somebody else? ;-) you of course. When I made the changes I put them on the forum |
|
|
|
Post by stevant on Dec 25, 2015 16:51:43 GMT
Hi billo,
Merry Christmas! I think you should try pCars again this time using the bff software. I think you will agree that it truly brings that game to life with the movement. I think the pCars works the best of all the games once using the bff software from Ian. Just my opinion.
Your platform looks amazing by the way.
Ciao,
Stevant
|
|
