|
Post by vicpopo on Dec 31, 2017 18:19:59 GMT
|
|
|
Post by vgracingse on Jan 7, 2018 9:50:44 GMT
All done!
|
|
|
Post by tronicgr on Jan 8, 2018 12:12:51 GMT
All done! They look great! I think its would be better is you shared the STL files and some description on Thingiverse... (example of my 3D prints there: www.thingiverse.com/thing:2563996 ) Thanks Thanos
|
|
|
Post by hexpod on Jan 18, 2018 16:17:30 GMT
Everything tested and it works good! The new mount do good! May I ask what is the electrical puropse of the fourth cable attached to the gearbox and where it goes on the other side?
cheers
|
|
|
Post by vgracingse on Jan 18, 2018 16:22:16 GMT
Everything tested and it works good! The new mount do good! May I ask what is the electrical puropse of the fourth cable attached to the gearbox and where it goes on the other side?
cheers
It’s connected to the shield of the sensor cable. There is no connection on the other side. 😉
|
|
|
Post by hexpod on Jan 18, 2018 20:39:14 GMT
May I ask what is the electrical puropse of the fourth cable attached to the gearbox and where it goes on the other side?
cheers
It’s connected to the shield of the sensor cable. There is no connection on the other side. 😉 Is it supposed reduce the noise or its just for fun?
cheers
|
|
|
Post by vgracingse on Jan 18, 2018 21:51:58 GMT
It’s connected to the shield of the sensor cable. There is no connection on the other side. 😉 Is it supposed reduce the noise or its just for fun?
cheers
I tought the motors cables could interferes with the signal from the sensors. Am I wrong? I read that volt is sensitive. Maybe its overkill.
|
|
|
Post by hexpod on Jan 19, 2018 10:36:51 GMT
Is it supposed reduce the noise or its just for fun?
cheers
I tought the motors cables could interferes with the signal from the sensors. Am I wrong? I read that volt is sensitive. Maybe its overkill. Yes, good question. Is there any expert in electrics to confirm if it make sense or not? cheers
|
|
|
Post by riton39 on Jan 19, 2018 14:48:57 GMT
yes, it's for noise issues
|
|
|
Post by vgracingse on Feb 3, 2018 17:52:02 GMT
New feet! I have weld in nuts so it will be adjustable.
|
|
|
Post by vgracingse on Mar 14, 2018 4:57:24 GMT
Everything is being painted right now. Bend sheet metal to protect sensors!
|
|
|
Post by vgracingse on Mar 14, 2018 5:02:23 GMT
|
|
|
Post by vgracingse on Mar 15, 2018 18:35:41 GMT
Very excited!
|
|
|
Post by vgracingse on Dec 29, 2018 8:00:08 GMT
I’m back. Sorry for the delay🥺 Pedals, wheel, screens, gearbox and seat are coming together!
|
|
|
Post by vgracingse on Dec 29, 2018 18:43:33 GMT
|
|