|
|
Post by vgracingse on Jun 2, 2017 7:04:33 GMT
|
|
|
|
Post by vgracingse on Jun 2, 2017 19:30:25 GMT
Upper rod with spacers  |
|
|
|
Post by vgracingse on Jun 3, 2017 7:04:14 GMT
|
|
|
|
Post by vgracingse on Aug 9, 2017 20:21:47 GMT
Hi! Now I got some time to test Beijer inverter. It seems to work well and pretty fast. I seen that many of you are using Brakeresistors for your inverters. I'm afraid that this inverter are going to be weak when I play games. Because it doesn't support BRK, Brake resistors. If I have to, they have a bigger inverter at 1,5kw that support BRK. What do you guys think? Is it worth to buy the 1,5kw with BRK instead if 0,75kw without BRK?  |
|
|
|
Post by tronicgr on Aug 12, 2017 12:02:35 GMT
Hi! Now I got some time to test Beijer inverter. It seems to work well and pretty fast. I seen that many of you are using Brakeresistors for your inverters. I'm afraid that this inverter are going to be weak when I play games. Because it doesn't support BRK, Brake resistors. If I have to, they have a bigger inverter at 1,5kw that support BRK. What do you guys think? Is it worth to buy the 1,5kw with BRK instead if 0,75kw without BRK? I would suggest the 1.5KW ones, You never know when you going to need the extra power (additional load on platform, a game that needs lots of fast reversing motion like most car racing games do). Using the Braking Resistors will also reduce the heat from the motors when they need to hold position or move slowly (more power is needed to start the motor from stand still). Thanks Thanos |
|
|
|
Post by vgracingse on Aug 27, 2017 19:13:57 GMT
Okey thanks! I have now tried Beijer 0,75kw without BRK and Siemens 4kw with BRK! There is worth it to buy a better VFD. Because the Beijer make the motors sounds horrible. Siemens just make it smooth and fast!  So now I have bought 6 SEW movidrive which came with brakeresistors 90ohm 100w. I will tell you later about these! I waiting for USB11a cable to setup parameters for my motors!  |
|
|
|
Post by dureiken74 on Aug 27, 2017 19:43:59 GMT
Hi ! what a project what are your results in term of heave/surge pitch roll yaw with your rig ? thanks  |
|
|
|
Post by vgracingse on Aug 27, 2017 19:54:58 GMT
Thanks!
I don't know right now. I will tell you later. I'm doing the electrical for the moment.
Haven't been at the Cad computer for a while, hope you can wait for my results!
|
|
|
|
Post by vgracingse on Nov 6, 2017 7:56:54 GMT
Last week much have happened! The simulator is soon getting there! Most of the metal parts are welded and done!  Plasma cutted upper frame  Base+all welded   Have also build a plywood box for the inverter and the amc1280 |
|
|
|
Post by vgracingse on Nov 6, 2017 16:16:48 GMT
Board mounted! Just waiting on cables between the cards! Thanos showed me dupont wires on eBay! THANKS!  |
|
|
|
Post by vgracingse on Nov 13, 2017 20:50:35 GMT
  Turn motors for best cable connection  Laser cut stainless-steel. Drawn by me  Plywood box. Waiting for cables! Then start to wire everything up! |
|
|
|
Post by riton39 on Nov 13, 2017 23:29:57 GMT
very nice ! good job  |
|
|
|
Post by vgracingse on Nov 15, 2017 20:03:38 GMT
very nice ! good job Thanks!!😉 |
|
|
|
Post by vgracingse on Nov 15, 2017 20:05:52 GMT
 Box-stand! 15x20mm Aluminum |
|
|
|
Post by tronicgr on Nov 18, 2017 13:00:09 GMT
What is this stand for?
|
|
