Good Morning I'm busy with my project at the moment .Do you have measurements for the frame ( This is for the motors , seat and brackets ). I'm planning to do a steel base with lockable roller wheels to move it if I have to. Maybe build in sections to disassemble and reassemble at a different place. Thank You
Glad you like this design. The base I designed could disassembled to 6 parts and could reassembled within 1.5 hours only one person(only the base, reassemble the complete platform will cost 3 hours, 2 person). But trust me, it is not easy to transporting it even disassembled and you need to make some proper transport cases to store all parts
About the lockable roller, I haven't consider it but I think it will work with some very strong universal wheels and need a very strong stand structure. Also you need to take care about the movement of the platform when running, not only lockable base but some fixed mode with ground.
I can provide all the measurements of my platform base design but I don't think you could use is directly because of the different motor and gearbox or even a different upper platform size. Please send me a message for more information.
Thank You for the information. I like your design from the photo that you've send. Is it possible to send me some of your measurements and drawings that can help with my Simulator. I will appreciate it if you can. Regards Theuns
Good Morning. I've checked last night and I think you are correct on the lockable roller . It's not going to work. I think the best is to work with a flat base , that will be more stable. I'm waiting for my motor's and the Gearbox to be delivered. I want to use your design as a guideline for my platform base and for the upper platform I'm going to use 3 X screens. I just want to have a look at your upper platform for ideas. Thanks for helping. Regards Theuns My email is firstname.lastname@example.org
dureiken: Hi there, it's really quiet here someone could help me for my 6 dof project ? thanks a lot
Aug 8, 2017 15:34:46 GMT
tronicgr: dureiken Hi, Open a thread and I'll try my best to help. A little busy with Kickstarter details at the moment but I'll see what I can do.
Aug 12, 2017 11:57:42 GMT
dureiken74: I just did it
Aug 27, 2017 11:59:06 GMT
fimmy: How's the firmware going?
Sept 6, 2017 8:34:43 GMT
tronicgr: @fimmy I had to put it on hold to finalize the manufacturing of the new kickstarter controllers. I tested parts of it to ensure compliance with the new features and looks good so far. I'll get back to it soon for integration.
Sept 9, 2017 12:52:35 GMT
Theuns: Very nice design.I'm also busy with mine and changing it also to Linear Actuators with 220v Servo motors.I'm waiting for my new controllers from Thanos. If I may ask Do you have any Sketchup files of your design and willing to share it I Thanks Theuns
Sept 14, 2017 22:45:09 GMT
atayeu: Hey everyone! I'm reading up and gathering all of the intel I can find for my first motion platform. this is by far best information for creating one.
Oct 14, 2017 7:25:57 GMT
tmcnam: I must be crazy but I still can't find the blueprints to the platform by GA-Dawg. Any help would be appreciated. Thanks guys.
Mar 10, 2019 21:31:57 GMT
Trip Rodriguez: Sorry tmcnam, the shoutbox doesn't get much attention. Did you find the blueprints? They are at the VERY bottom of the extremely long first post. It says "attachments: 6DOF.zip
May 4, 2019 19:13:25 GMT
zivby: How much weight this setup can carry?
May 19, 2019 11:57:16 GMT