May I ask what kind of formula are you using to calculate G-forces?Regards
Just want to share a really simple solution to calculate g-force, only if your 6dof is completed, you can just use G-Force measurement apps on android and iphone. It basically use the accelerometer inside your phone. Some apps can detect maximum force and some in real time. I am not sure if it is accurate because my 6dof project not started yet.
Looks very neat. How fast is displacement of the actuator in mm/sec? And from the look it is about 30-40cm displacement?
The motors can run to 4200 RPM. This tests was setted about 3000. The speed is near 450mm/sec, with 80% Amc speed. I think the came easy near 600mm/sec, using max speed of the motors. But its not necessary.
Today i placed a racing seat on the top of the platform. Using 3000 rpm, and only 30% amc speed, was insane fell a F1 drivem by AI.
That is very fast actuator. And how far is the stroke (displacement) itself, the travel of the actuator? May i ask how much each cost you (can pm me)?
dureiken: Hi there, it's really quiet here someone could help me for my 6 dof project ? thanks a lot
Aug 8, 2017 15:34:46 GMT
tronicgr: dureiken Hi, Open a thread and I'll try my best to help. A little busy with Kickstarter details at the moment but I'll see what I can do.
Aug 12, 2017 11:57:42 GMT
dureiken74: I just did it
Aug 27, 2017 11:59:06 GMT
fimmy: How's the firmware going?
Sept 6, 2017 8:34:43 GMT
tronicgr: @fimmy I had to put it on hold to finalize the manufacturing of the new kickstarter controllers. I tested parts of it to ensure compliance with the new features and looks good so far. I'll get back to it soon for integration.
Sept 9, 2017 12:52:35 GMT
Theuns: Very nice design.I'm also busy with mine and changing it also to Linear Actuators with 220v Servo motors.I'm waiting for my new controllers from Thanos. If I may ask Do you have any Sketchup files of your design and willing to share it I Thanks Theuns
Sept 14, 2017 22:45:09 GMT
atayeu: Hey everyone! I'm reading up and gathering all of the intel I can find for my first motion platform. this is by far best information for creating one.
Oct 14, 2017 7:25:57 GMT
tmcnam: I must be crazy but I still can't find the blueprints to the platform by GA-Dawg. Any help would be appreciated. Thanks guys.
Mar 10, 2019 21:31:57 GMT
Trip Rodriguez: Sorry tmcnam, the shoutbox doesn't get much attention. Did you find the blueprints? They are at the VERY bottom of the extremely long first post. It says "attachments: 6DOF.zip
May 4, 2019 19:13:25 GMT
zivby: How much weight this setup can carry?
May 19, 2019 11:57:16 GMT