|
Post by Trip Rodriguez on Jun 25, 2019 6:27:58 GMT
Greetings!
I just got my AMC reinstalled after switching it to 12 bit and I believe it looks quite a bit smoother at very low speeds so things continue to improve!
I still want my slowest actuator speed lower than it is now. If this means sacrificing maximum speed I may be willing to make that sacrifice depending on the numbers.
(B082 is already at the lowest setting (0.01) and A013 is at zero.)
So is there any way to reduce the lowest speed (hopefully by at least half) either on the AMC1280USB, or on the Hitachi WJ200 inverters? I've got the AMC minimum speed set to zero.
PS- Mechanical changes are not an option. I'm looking for either settings I can change on the electronics, or maybe something like adding resistors.
Thanks for any help, I'll be digging through the Hitachi user manual trying to see what I can learn. =)
|
|
|
Post by Trip Rodriguez on Jun 25, 2019 7:28:37 GMT
If anyone more knowledgeable wants to look at the Hitachi WJ200 manual for me www.hitachi-america.us/ice/sites/default/files/products/inverter/WJ200_Instruction_NT325X%281%29.pdf , the following are the settings that looked like possibilities but I don't know enough to play with them without some advice first: H005 looks like maybe the best possibility C081 and C082 look very promising, but it says customer adjustment not recommended and I don't know if I should experiment with it. A145 is a frequency offset, requires intelligent input terminal
|
|
|
Post by Trip Rodriguez on Jun 27, 2019 23:31:48 GMT
C081 seems to have worked. I haven't touched the others yet.
|
|