the program is already in a subfolder on the desktop which results with the attribute 'read only'
I tried to disable it in several ways but apparently it is a bug of win10 and always returns checked 'read only'
I gave the 'hexpod l running as an administrator but does not change anything.
If I open the ini file to edit it manually I can not find anything about these 3 parameters (while the others are set and remain in memory without problems)
You place below the .ini file (minus the last line of the key) if you can tell me what change manually. thank you
il programma è gia in una sottocartella sul desktop la quale risulta con attributo "sola lettura"
Ho provato a disattivarlo in più modi ma a quanto pare si tratta di un bug di win10 e ritorna sempre spuntato "sola lettura"
Ho dato a l' hexpod l'esecuzione come amministratore ma non cambia nulla.
Se apro il file ini per modificarlo amnualemnte non trovo nulla riguardo a questi 3 parametri (mentre gli altri sono settati e restano in memoria senza problemi)
Ti posto qui sotto il file .ini (meno l'ultima riga della key) se sai indicarmi cosa modificare manualmente.
grazie
[////////////////////////3dview//////////////////////]
x=2.900000
y=0.500000
z=12000.000000
[//////////////////////6DOF_design///////////////////]
Base_Radius=694
Platform_Radius=396
Platform_Height=476
Servo_Arm_length=160
linear_act_max=625.000000
linear_act_min=305.000000
[/////////////////////6DOF_limiters//////////////////]
Max_displacement=80
Crossing_Sensitivity=0
Knee_Cap_limit=80
Servo_Rotate_Limit=90
[///////////////////6DOF_input_limits////////////////]
Yaw_Limit=150.000000
Pitch_Limit=150.000000
Roll_Limit=150.000000
Surge_Limit=100.000000
Sway_Limit=100.000000
Heave_Limit=100.000000
[////////////////6DOF_Center_of_Gravity//////////////]
X=0
Y=0
Z=100
[//////////////////////Settings//////////////////////]
Hardware_Connected=1
Invert_Servo_Values=0
guardian_off=0
linear=0
UseUpperServoLimit=1
ServosOnOutside=1
ServoArmsInward=1
hardware_autostart=0
single_core=0
high_priority=0
[///////////6DOF_heaveOffset_surgeOffset/////////////]
Heave=-100.000000
Surge=0.000000
[/////////////////Servo_Orientation//////////////////]
Servo1=180.000000
Servo2=0.000000
Servo3=60.000000
Servo4=240.000000
Servo5=300.000000
Servo6=120.000000
[/////////////Joint_Spacing/////////////]
Platform_Spacing=50.000000
Base_Spacing=685.000000
[/////////////////Servo_Calibration//////////////////]
Servo1_positive_range_16383-32737=32737.000000
Servo2_positive_range_16383-32737=32737.000000
Servo3_positive_range_16383-32737=32737.000000
Servo4_positive_range_16383-32737=32737.000000
Servo5_positive_range_16383-32737=32737.000000
Servo6_positive_range_16383-32737=32737.000000
Servo1_negative_range_25-16383=25.000000
Servo2_negative_range_25-16383=25.000000
Servo3_negative_range_25-16383=25.000000
Servo4_negative_range_25-16383=25.000000
Servo5_negative_range_25-16383=25.000000
Servo6_negative_range_25-16383=25.000000
Servo_Travel=90.000000
[//////////////////Servo_Dimensions//////////////////]
ServoWidth=2000.000000
ServoHeight=1000.000000
ServoDepth=1000.000000
Rotational_Plane=999.000000
[//////////////////Activation_key//////////////////]