ahmed
New Member
Posts: 2
|
Post by ahmed on Feb 25, 2018 0:23:30 GMT
Hi Guys, This is my first thread here and I'm happy to join this community I have to finish my simulator before flying for a long trip after few days and I have a very limited experience with electronics I need an urgent support from the experts here please, I'm using Delta VFD-E (http://www.delta.com.tw/product/em/drive/ac_motor/download/manual/DELTA_IA-MDS_VFD-E_UM_EN_20150302.pdf) and I need to know how to connect the AMC128 to the VFD, I'm using the VFD to run 1 HP AC motor The VFD wiring diagram as in the picture. and the full manual in the link I'm using SSI 12bit sensor and I'm able to connect please till me exactly how many cables should go from the board to the VFD ? should I used analog or PWM ? please excuse me for much details I'm asking about but I don't have good experience with electronics
|
|
ahmed
New Member
Posts: 2
|
Post by ahmed on Feb 26, 2018 19:35:39 GMT
Any help please, I'm unable to continue my setup due to this missing information
|
|