|
Post by riton39 on Sept 9, 2017 16:14:11 GMT
I'm looking for the reference to order these potentiometer and their connector, can you give me the link, I'll put them in order for my new AMC.
I can't find the link on the discussions on these sensors in the forum
thank you
|
|
|
Post by tronicgr on Sept 12, 2017 11:12:17 GMT
|
|
|
Post by riton39 on Sept 12, 2017 19:50:34 GMT
oh yes, ok !! thanks
|
|
|
Post by riton39 on Sept 14, 2017 16:35:07 GMT
is it possible via a mechanical adapter to directly fix the encoder on the back of the engine? on the motor directly, rather than on the gear box? is there a problem for the AMC? It would be better?
|
|
|
Post by riton39 on Nov 23, 2017 8:32:13 GMT
I made my supports for the encoders:
|
|
dirty
New Member
Posts: 2
|
Post by dirty on Jan 21, 2018 21:43:50 GMT
Hey there,... :-) I have also decided to go with the AEAT-6012. I ordered them from Digi-Key I still have a few questions that someone might be able to answer: 1. Will they work with the latest (early 2018) AMC1280 right out of the box, or is the adapter from OSH Park still required? 2. Does the current firmware already support multiturn? Would be sooooo much easier for linear actuators. 3. Is this the correct wiring for 6 AEAT-6012? So,... no Adapter? Help is much appreciated! Unfortunately I don't have a background in electronics, so taking baby steps here... Greetings :-)
|
|
|
Post by tronicgr on Jan 26, 2018 13:35:04 GMT
Hey there,... :-) I have also decided to go with the AEAT-6012. I ordered them from Digi-Key I still have a few questions that someone might be able to answer: 1. Will they work with the latest (early 2018) AMC1280 right out of the box, or is the adapter from OSH Park still required? 2. Does the current firmware already support multiturn? Would be sooooo much easier for linear actuators. 3. Is this the correct wiring for 6 AEAT-6012? So,... no Adapter? Help is much appreciated! Unfortunately I don't have a background in electronics, so taking baby steps here... Greetings :-) See this PCB layout from the new 2017 version PCB that shows where each data line connection of the sensors goes. Yes they will work without additional PCB from oshpark on the new 2017 - 2018 AMC1280USB boards. I'm finishing the support for multiturn for these SSI 12bit sensors these days. I'm working with someone to test it on linear actuators: www.youtube.com/watch?v=ltUsEpuyQ1wThanks Thanos
|
|
|
Post by hexpod on Feb 15, 2018 14:03:07 GMT
I made my supports for the encoders: very nice work. same sensor 3d printed socket for my planetary gearbox: cheers
|
|
|
Post by riton39 on Mar 4, 2018 21:36:43 GMT
nice work too! interesting these 3D printers! I really like the aluminum and the metal parts, ... but I must admit that it is interesting these pieces in 3 D Do you have details of these pieces?
|
|