lupus
Users
Never GIVE UP
Posts: 24
|
Post by lupus on Aug 12, 2016 8:57:39 GMT
Good question paul, I'm using microservos, 180 degrees of movement in total ; with polulu card connected to amc.
At half position they are in Hold position , lets say parallel to ground.
I though that seeting 50% means let them to move +45 / -45 degrees to avoid vertical position . (May be i was wrong).
As you know better than me , microservos have the signal position , so it is not needed a potenziometer as in a real rig.
When i push amc direction botton they react immediately and come back in intial position very slowly.
But when i connect to bff and simulator i change pitch or roll the platform reach after 10 seconds with a shiny waited movement .
So impossible to understand if reaction during fly is correct.
No i'm confused if problem may be on how i settedup amc or may be in bff ... or other.
Surely until i'm not able to let a mini platform working, means i'm very very far to start the real one. (MUCH more complex).
Good day
|
|
|
Post by GA-Dawg on Aug 12, 2016 12:02:04 GMT
I would change your feedback back to default
I believe what your describing is the "timeout". Remember that with no input the timer starts. In a sim the "timer" won't happen until the sim is stop (or the sim stops sending telemetry)
Cheers, GA Dawg
|
|
|
Post by paulg100 on Aug 12, 2016 12:02:18 GMT
no the feedback limit tells the amc how much of the feedback range of the pot to use.
so 50% means it only uses a fraction of the pots range.
lower it to 10% and see what happens.
|
|
lupus
Users
Never GIVE UP
Posts: 24
|
Post by lupus on Aug 12, 2016 12:03:08 GMT
Ok i try.
|
|
lupus
Users
Never GIVE UP
Posts: 24
|
Post by lupus on Aug 12, 2016 18:10:10 GMT
no the feedback limit tells the amc how much of the feedback range of the pot to use. so 50% means it only uses a fraction of the pots range. lower it to 10% and see what happens. You were right paul, restoring that setting , reaction seem more normal. I dont touch amc any more , and i think now i have to fine tune BFF and see if movements are the expected ones.. It now time to understand the software part. Thank you for help so far !
|
|
|
Post by billo2404 on Sept 17, 2016 23:59:09 GMT
Ciao Marco, è un po' che non sfogliavo le varie discussioni pe il poco tempo a disposizione ma vedo con piacere che hai iniziato l'avventura. Mi piace molto il tuo sitema di proiettori,quanti ne usi,2 o 3? Usi un software prticolare o sono sttati semplicemente come triplo schermo?
Hello Marco, is a bit 'not thumbed through the various discussions eg the short time available but I see with pleasure that you started the adventure. I really like your gaming system of projectors, than it uses, 2 or 3? Use a prticolare software or are sttati simply as triple screen?
|
|
lupus
Users
Never GIVE UP
Posts: 24
|
Post by lupus on Jan 15, 2020 18:52:52 GMT
Hi all, 4 year are passed and i didnt proceed with my old project.
I still have a thanos' AMC1280+Ext and the polulu. Never used.
Does anybody want to buy it ?
|
|