|
Post by vicpopo on May 18, 2016 16:09:38 GMT
Hi heXapod ,
When looked at your post at my job , I was impatient to go home and to test your new release.
As my configuration matches to the 0° configuration , I pressed on the button , after one more time the optimise button and I tested on my 6 dof only the 6 movements !!
And I can't believe it , yes , yes , yes and yes and yes , the surge and sway are PERFECTLY FLAT my friend !!! I'm waiting for this for a long time ....
I appreciate a lot your work for this .
Merci , merci et encore merci
I will test soon with the sim in action ... I don't know how to thank you !
|
|
|
Post by hexpod on May 18, 2016 16:15:20 GMT
Hi heXapod , When looked at your post at my job , I was impatient to go home and to test your new release. As my configuration matches to the 0° configuration , I pressed on the button , after one more time the optimise button and I tested on my 6 dof only the 6 movements !! And I can't believe it , yes , yes , yes and yes and yes , the surge and sway are PERFECTLY FLAT my friend !!! I'm waiting for this for a long time .... I appreciate a lot your work for this . Merci , merci et encore merci I will test soon with the sim in action ... I don't know how to thank you ! Eh oui! Papa Noel a fait fort...:-)
|
|
|
Post by vicpopo on May 18, 2016 16:20:48 GMT
tu es francais ?
|
|
|
Post by vicpopo on May 18, 2016 16:42:54 GMT
I just tested on my 6 dof and need to be confirmed .
As you swaped the Surge and Sway in the plugin which now is correct for the name of the movement , I tested the 6dof .dll for xsim and the axis surge and sawy are also sawped . What is strange is that your last 6dof .dll , I didn't notice this .Humm strange ...
I will check this'one more time and I will swap on my xsim profile the effects 25 and 27 in surge and sway axis declared on xsim.
|
|
|
Post by hexpod on May 18, 2016 17:41:22 GMT
I tested the 6dof .dll for xsim and the axis surge and sawy are also sawped . Could you please re-download and test again?
Both, exe and dll are all fine in my setup.
|
|
|
Post by vicpopo on May 18, 2016 17:51:36 GMT
Ok will give a try as you ask for !
|
|
|
Post by hexpod on May 18, 2016 17:57:23 GMT
Ok will give a try as you ask for ! Thanks,
what is the motor order wiring to the amc?
is your motor nr 1 red? nr 2 orange?
what is your "sensor direction in the Fabi"s configurator?
|
|
|
Post by vicpopo on May 18, 2016 18:42:52 GMT
I used the motor placement as the shema above .For the sensor direction have to check.
|
|
|
Post by vicpopo on May 18, 2016 20:28:30 GMT
Pos 135 Neg 246
|
|
|
Post by hexpod on May 18, 2016 20:40:10 GMT
Yes, that's seems correct.
According to this diagram, in the 3d model, rear is where red and orange sevos (top of the cube) are attached.
Forget one second your platform and tell me if the 3d model is moving correctly according to the sliders.
Thanks.
|
|
|
Post by vicpopo on May 18, 2016 21:28:07 GMT
First yes it's ok for the sway and surge .As before they were swaped I put into sway the effect 27 longitudinal and into surge the effect lateral 25.As now you corrected it i just swaped the effect into the correct movement surge = 27 and sway = 25.So everything is well done now.
red servo up is servo n° 4 , orange servo up is servo n° 5 according my pics above and they are the servos back OK for me
For the sliders did you have an orientation ? The sliders are from the middle pushed to left and right , so as i don't know how the sens is setup , below the results and it matches exactly to the real simulator displacement :
Slider L = slider on left
YAW : slider L _ 3D moves right ( CW) PITCH : slider L _3D tilt down front ROLL : slider L _3D tilts down right SWAY : slider L _3D moves direction left SURGE: slider L _3D moves direction front HEAVE : slider L _3D moves direction down
Is it understandable ?
edit : tested with pcars and just really great ! Thanks
|
|
|
Post by hexpod on May 18, 2016 22:11:44 GMT
First yes it's ok for the sway and surge .As before they were swaped I put into sway the effect 27 longitudinal and into surge the effect lateral 25.As now you corrected it i just swaped the effect into the correct movement surge = 27 and sway = 25.So everything is well done now. red servo up is servo n° 4 , orange servo up is servo n° 5 according my pics above and they are the servos back OK for me For the sliders did you have an orientation ? The sliders are from the middle pushed to left and right , so as i don't know how the sens is setup , below the results and it matches exactly to the real simulator displacement : Slider L = slider on left YAW : slider L _ 3D moves right ( CW) PITCH : slider L _3D tilt down front ROLL : slider L _3D tilts down right SWAY : slider L _3D moves direction left SURGE: slider L _3D moves direction front HEAVE : slider L _3D moves direction down Is it understandable ? edit : tested with pcars and just really great ! Thanks Thank you,
Are the movements of your real platform matching correctly the 3d representation now?
Thanks
|
|
|
Post by vicpopo on May 19, 2016 4:26:47 GMT
Yes
|
|
|
Post by vicpopo on May 19, 2016 5:34:33 GMT
Yes you are, of course ;-) The french touch lol !
|
|
|
Post by hexpod on May 19, 2016 10:00:00 GMT
The last thing which remain mysterious to me, is the "Max. Dep. limiter" I was unable to find a logical sense in its behavior. It would be good to figure out, what is the purpose of it.
|
|