|
Post by comandante2 on Nov 20, 2015 22:27:53 GMT
my card AMC1280USB nn longer read from my pc but is recognized as FT232R USB UART
can you help me ?
thank you
|
|
|
Post by tronicgr on Nov 21, 2015 1:53:36 GMT
Can you take a screenshot of how it looks in the device manager?
Do you see it as COM port?
Also what FTDI driver version you have? Windows version? Apart from that, there is really no other driver needed for the AMC1280USB.
Thanks Thanos
|
|
|
Post by comandante2 on Nov 22, 2015 18:47:34 GMT
hello boss !!! I am attaching the three possible file plus three more in the next, I tried to connect your card to another PC because I have two networked, but I have the same problem, I asked for help to my computer support (that in a week I delivery of a new PC), but he also says that we need a driver. I believe you! help me to solve this problem. thank you
|
|
|
Post by comandante2 on Nov 22, 2015 18:48:51 GMT
|
|
|
Post by tronicgr on Nov 22, 2015 19:04:13 GMT
I see it took correct driver already. In the motion software you just need to define that you are using COM4 for the motion controller.
Thanks Thanos
|
|
|
Post by comandante2 on Nov 22, 2015 21:00:06 GMT
ook! now it works I expected it to be named with the name of your card! thank you 1)Now I'm trying with only one axis of the pitching problem is that as soon as I connect the inverter to the current movement in the negative, move the hand encoder and nothing happens, does not stop if you do not rip your current watch video you place: - come I connected the encoder and board What can be? 2)Connect the second receiver to the next input that is the No. 2 and move to hand the encoder but the scale does not move anything but I checked that the wires are attached well Attachments:IMG_0183.MOV (932.83 KB)
IMG_0185.MOV (981.61 KB)
|
|
|
Post by comandante2 on Nov 22, 2015 21:00:46 GMT
when you connect the voltage should not remain standing still? Attachments:
|
|
|
Post by tronicgr on Nov 23, 2015 11:43:39 GMT
Which inverter do you have? Model? Link to manual or datasheet?
You should set it for Voltage reference (VF) and direction (from the digital input). Also make sure you connected the 0-10v output from the 6DOF ext board to the Voltage In of the inverter not the current input.
Thanks Thanos
|
|
|
Post by comandante2 on Nov 23, 2015 21:13:26 GMT
|
|
|
Post by comandante2 on Nov 23, 2015 21:35:20 GMT
ok risolto! Grazie per i vostri consigli preziosi e un buon servizio in pochi giorni attribuisco video
|
|
|
Post by comandante2 on Nov 25, 2015 20:58:34 GMT
hello Thanos! dopo aver superato i problemi! . Ho altri problem VFD restare immobile e ho chiesto Ian fot con quello che potrebbe essere attaccato, e lui mi ha detto così: L'immagine sembra a posto. Il software è in attesa, sta ricevendo i dati a circa 38 FPS, si sta inviando l'output a COM4. . L'aereo sembra essere fermo a terra Tu dici - "clicco" comando manuale "e muovo il passo stecca (ho collegato solo questo di de DOF), non si muove nulla." Fa la barra di avanzamento blu per l'attuatore passo su la mossa del software? Ha il testo di dati "Binario Out" si muove? Se lo fa, allora il software movimento sta inviando i dati fuori - se la piattaforma non si muove poi c'è molto probabilmente un problema con la configurazione hardware. . Il software di movimento invia i dati nel formato corretto temo che non posso aiutarti con carte Thanos 'o il loro collegamento - E' solo che non ho abbastanza conoscenza. Ma il problema è molto improbabile che sia dati errati dal software di movimento. I can confirm that the software sends data out Si conosce il problema? Attachments:
|
|
|
Post by comandante2 on Nov 29, 2015 21:48:39 GMT
|
|