|
Post by riton39 on Aug 30, 2014 16:57:55 GMT
Hi , thank you for this forum! This forum also support for the AMC 64? it is for our discution on the PID and the dead zone in the center.
|
|
|
Post by riton39 on Jan 10, 2015 23:03:19 GMT
Thanos, you go make the improvements you have brought on AMC 128 on this card? I think for example of the dead zone.
I use it on my 2DOF as you probably know
|
|
|
Post by tronicgr on Jan 15, 2015 6:54:29 GMT
Hi Richard
I'll try to bring the improvemnets to the AMC644USB as well but it wont have the option for configuration from the PC with Fabi configurator, as it does not have enough memory to fit all the code (64kb only).
Just give me some time as I have a dozen things that I develop in parallel. Its not just copy paste, there is code that cannot be used by the AMC644USB and needs to be trimmed.
Thanks Thanos
|
|
|
Post by riton39 on Jan 15, 2015 8:09:39 GMT
Ok, thanks
|
|
|
Post by riton39 on Aug 24, 2015 19:39:34 GMT
Thanos, you go make the improvements you have brought on AMC 128 on this card? I think for example of the dead zone. I use it on my 2DOF as you probably know +1 news about an update for the AMC 64 for the dead zone for exemple ? thanks
|
|
|
Post by tronicgr on Aug 25, 2015 15:55:35 GMT
This weekend I'll have a little more free time, so I'll attempt to port the latest amc1280usb code to the older AMC644usb board. I'll have to trim it a lot as of less connectivity options available and smaller memory. But it should work like the amc1280usb after the procedure. Sorry for not looking into this earlier, there is lots of activity going on in the background all the time that I try to get it on the surface on the forum to benefit all. Thanks Thanos
|
|
|
Post by riton39 on Aug 26, 2015 11:53:29 GMT
ok, thank you, I'm about to put the simulator in use I'd take the news. what is important is the dead zone in the center to optimize the PID and settings. thanks
|
|
|
Post by riton39 on Nov 5, 2016 21:48:23 GMT
Hi , what is the latest version of the AMC 64? Firmware AMC644USB 6DOF 1.0f ?
now I have the D
I can do the upgrade to the F for my 2 DOF? thanks
|
|