Just to let everyone, that I cannot provide support personally, for sim tools. I cannot deal with these people. They don't want to create anything more than toys and don't welcome anything that they don't sell through their shop (marketplace).
That is awful as they claim to welcome all DIY builders, but that is not the case if they force them to use ONLY their suggestions and parts they sell. On the other hand they welcome people to BUY commercial simulators and then "help" them to make them compatible with their software? That doesn't make sense!!
There are other motion software developments out there that are way better, with real support, and worth to invest into.
Q: so sim tools will no longer support?Thanos 6 dof motion ?
Its is still compatible. But they don't wish to use professional grade math plugin as x-sim3 does. I was offering it to them for free, but they don't want it as it works only with amc1280usb...
Therefore all the it can be done is to use the approximate combination profiles they make that are not accurate but will short of work...
Also I cannot participate on their forum anymore as they are taking bsft side being rude and paranoid, and they banned me instead for replying to his derogatory comments to OTHERS!!! I don't know why they keep covering for him, I seen many members complain about him, only to see the admins removing or EDIT the comments and "PAY" their silence with the stupid "coin" system they use to "SELL" the information that otherwise is public domain!! Its sad to see people fall for that...
I've also given up on their forum. Shame, there are some nice people there, but loud and rude members are just a bit too much. I was thinking about that member a while back and the most likely explanation is that he has some kind of learning disability, or some other form of mental handicap (which would explain the levels of his technical knowledge, rudeness and paranoia), in any case I think it's a bad idea to let him vent his frustration on anyone, although I do feel a bit sorry for him sometimes.
dureiken: Hi there, it's really quiet here someone could help me for my 6 dof project ? thanks a lot
Aug 8, 2017 15:34:46 GMT
tronicgr: dureiken Hi, Open a thread and I'll try my best to help. A little busy with Kickstarter details at the moment but I'll see what I can do.
Aug 12, 2017 11:57:42 GMT
dureiken74: I just did it
Aug 27, 2017 11:59:06 GMT
fimmy: How's the firmware going?
Sept 6, 2017 8:34:43 GMT
tronicgr: @fimmy I had to put it on hold to finalize the manufacturing of the new kickstarter controllers. I tested parts of it to ensure compliance with the new features and looks good so far. I'll get back to it soon for integration.
Sept 9, 2017 12:52:35 GMT
Theuns: Very nice design.I'm also busy with mine and changing it also to Linear Actuators with 220v Servo motors.I'm waiting for my new controllers from Thanos. If I may ask Do you have any Sketchup files of your design and willing to share it I Thanks Theuns
Sept 14, 2017 22:45:09 GMT
atayeu: Hey everyone! I'm reading up and gathering all of the intel I can find for my first motion platform. this is by far best information for creating one.
Oct 14, 2017 7:25:57 GMT
tmcnam: I must be crazy but I still can't find the blueprints to the platform by GA-Dawg. Any help would be appreciated. Thanks guys.
Mar 10, 2019 21:31:57 GMT
Trip Rodriguez: Sorry tmcnam, the shoutbox doesn't get much attention. Did you find the blueprints? They are at the VERY bottom of the extremely long first post. It says "attachments: 6DOF.zip
May 4, 2019 19:13:25 GMT
zivby: How much weight this setup can carry?
May 19, 2019 11:57:16 GMT
jeanmarcfr69: Thanos je suis francais et j'ai besoins de compléments d'information pour finaliser une installation avec 1 x AMC1280USB DELUX avec extension 3x servo motor DORNA. POurriez vous m'aider ?
Apr 12, 2021 6:58:17 GMT