|
Post by tronicgr on May 17, 2015 14:48:51 GMT
May I add, the spring loaded solution will handle better any backlash from the gearbox too (all gearboxes have some backlash)... Yeah thats a good point tronicgr. Do you know what the typical backlash is in the 80:1 and 60:1 worm drives being used. measured at the end of the lever arm? Not sure, depends on the gearbox internal configuration. Here is an interesting article I found on this matter. m.machinedesign.com/technologies/methods-minimize-gear-backlashThanks Thanos
|
|
johann
Junior Member
Posts: 57
|
Post by johann on Dec 13, 2016 14:53:12 GMT
To use springs I think is a good idea. Here is a proposal you cold it also mount, see attached picture. Johann
|
|