|
Post by stevant on Feb 21, 2015 21:10:52 GMT
Can you post some video of what is happening and let us see how you have it setup please?
|
|
|
Post by riton39 on Feb 22, 2015 11:33:57 GMT
you must locate the cursor. the cursor, the white cable. Then you have the + and - why do not you keep the PPC 27? it's the same for a hall sensor:
|
|
|
Post by riton39 on Feb 22, 2015 22:57:27 GMT
you must identify the physical position of the cursor on your sensor. it is not in the same place on the PPC 27
|
|
|
Post by tronicgr on Feb 23, 2015 11:24:46 GMT
Hi Hiton I still dont understanding what the "cursor" is? Cursor is the grid? (the "iron" cable) Sorry, my tecnical english os awefull Regards you must identify the physical position of the cursor on your sensor. it is not in the same place on the PPC 27 By cursor he means the "wiper" on a potentiometer. The 6127V1A180L.5FS sensors label this as "out". So you need to provide the GND,+5v and OUT. If you are using shielded cables, you should use one that has 3 wires inside for the above three, and connect the GND to the metal housing shield as well. Thanks Thanos
|
|