berty
New Member
Posts: 7
|
Post by berty on Dec 17, 2014 17:16:01 GMT
Hi everyone, I need advice on how to set sim tools (axis assignments, limiting axis,,,) for DCS to make it go right. because when I turn on the mission but does any free flight, so I rotate the entire platform and makes it even occasionally while playing, as you can see in the video. www.youtube.com/watch?v=v1eFLwJEufQ&feature=youtu.be
|
|
|
Post by tronicgr on Dec 18, 2014 7:49:50 GMT
Hi everyone, I need advice on how to set sim tools (axis assignments, limiting axis,,,) for DCS to make it go right. because when I turn on the mission but does any free flight, so I rotate the entire platform and makes it even occasionally while playing, as you can see in the video. www.youtube.com/watch?v=v1eFLwJEufQ&feature=youtu.beHi Andrej, I wish I could help you with that, but I don't have either sim tools or DCS. Did you try to ask for help in their forum? Thanks Thanos
|
|
|
Post by iamcanadian2 on Dec 19, 2014 17:25:03 GMT
Hey I use sim tools. I had issues with it too but now its works great. I only have tried No limits 2 . , my time has been slim lately but a racing sim is coming soon. My settings in the interface was the fault with me. make sure you have the out put bit rate set to 16 - -Binary interface output 2ms output type - Server. on the 1280 card. set the pid to 20 all 3 and go from there. you do have all the interface motion set up? Axis assignments? see attached picture I use a 3 dof only so 3 axis. Attachments:
|
|
berty
New Member
Posts: 7
|
Post by berty on Dec 20, 2014 17:42:39 GMT
Hi, Thank you for your answer, but it still does the same thing at the beginning of the game and I noticed that it does not transmit the correct data from the game. For other games (IL-Sturmovik) it goes as it should. But not at DCS, while settings are the same.
|
|