|
Post by carbon on Feb 7, 2016 6:39:21 GMT
FI in regard to the above - From my testing to date unless you are using a joystick make sure the joystick number is disabled Ie set to '0'. and not '1' as it is in the default Eg. ; Joystick number for driver remote control buttons, =0 to disable, otherwise set to joystick number on system Joy_But=0
I found that if left as 1, it caused a smoothing of the output (noticeably Heave) which you may not want. Don't know why?
|
|
|
Post by vulbas on Feb 8, 2016 18:29:38 GMT
thx carbon i will test
|
|
|
Post by mhensen on Mar 1, 2016 13:55:13 GMT
can anybody explain this line in the BFF config?!
;Height of pitch and roll center above upper actuator pitch circle - mm Rot_Height=300.0
|
|
|
Post by hexpod on Mar 1, 2016 15:31:48 GMT
can anybody explain this line in the BFF config?! ;Height of pitch and roll center above upper actuator pitch circle - mm Rot_Height=300.0 It's the the gravity center above the platform.
bffsimulation.com/Manual-6DOF/Settings.php
You can put it to 0.0 and observe how it is affecting the pitch and roll response.
|
|
|
Post by billo2404 on Sept 13, 2016 23:10:02 GMT
sarei curioso di provare bff software ma mi spaventa un po' passare da X-Sim che ormai conosco bene a un software che non conosco per niente. X-sim e bff possono convivere nello stesso pc e essere utilizzati entrambi oppure ciò crea problemi? è molto difficile la configurazione di bff motion?
I'd be curious to try bff software but a little scary having to X-Sim that now familiar to software that does not know at all. X-sim and bff can coexist on the same pc and be used both or create problems? It is very difficult to configure bff motion?
|
|
|
Post by paulg100 on Sept 14, 2016 13:23:53 GMT
Cant comment on how they will run on same PC as don't use xsim yet
but BFF is very easy to configure. Theres plenty of us here using it so no probs helping if your not sure on anything.
|
|