|
Post by tronicgr on Dec 15, 2018 22:56:13 GMT
|
|
fimmy
New Member
Posts: 16
|
Post by fimmy on Dec 16, 2018 12:44:24 GMT
thought you may have retired.
|
|
|
Post by tronicgr on Dec 16, 2018 18:10:29 GMT
thought you may have retired. Haha, no, lots of new development in servomotor related interfaces, too busy to visit here.
|
|
|
Post by riton39 on Dec 18, 2018 22:23:27 GMT
what are the changes, the improvements of this version? does it change the quality of rendering in games? best moves or something else positive for the end result? thanks Richard
|
|
tony
New Member
Posts: 23
|
Post by tony on Dec 22, 2018 5:08:13 GMT
Nice Work Thanos! No more "Out Of Nowhere Kicking". You nailed it!. Keep up the great work. You rock! Merry Christmas.
|
|
|
Post by vicpopo on Dec 27, 2018 10:26:01 GMT
Hi Thanos ,
I sent you a pm ;-) for news and asking you if this release is ok for xsim3. In meantime tested and not working for xsim3 and heXpod plugin . When I ‘m wanted to test the movements into heXpod plugin into xsim my pc frozen ! It’s like all usb connections was been shut down ! I reseted my PC and go BACK to the previous release ! Without the com port detection as you know i could test the movements into heXpod into xsim as before . Greetings and happy Xmas and so on !
|
|
|
Post by hexpod on Dec 27, 2018 19:36:41 GMT
Hi Thanos , I sent you a pm ;-) for news and asking you if this release is ok for xsim3. In meantime tested and not working for xsim3 and heXpod plugin . When I ‘m wanted to test the movements into heXpod plugin into xsim my pc frozen ! It’s like all usb connections was been shut down ! I reseted my PC and go BACK to the previous release ! Without the com port detection as you know i could test the movements into heXpod into xsim as before . Greetings and happy Xmas and so on ! Please get the heXpod 2.4 which should be compatible with the FW3.5. Test first only with the .exe version and check that your motion is correct. If everything works fine, make a backup copy of your old .dll for xsim and replace it with the new one from the package. The new dll should work silently showing you the axis of the AMC and the unified exe should do the rest of the job. The small inconvenience is that you will have to run heXpod separately form xsim. You can do it by simply place a shortcut in your windows startup folder. If you want a fully automated start, additionally check the "Hardware Auto Start" checkbox. Along all the benefits coming from tons of updates, the only change you may experience will be the X-sim on/off button which doesn't cut the motion transmission anymore. So don't be surprised and keep the hand on your kill switch while you're testing all new features for the first time. I hope this works. Cheers
|
|
|
Post by vicpopo on Dec 27, 2018 19:44:35 GMT
Ok Thx heXpod !
Humm a lot of change in the setup ! Don’t know if I will proceed to this update ! And what about your plugin key ? If i use the .exe will need a key ?
I’m not sure I will test the 3.5 again.
Greetings
|
|
|
Post by hexpod on Dec 27, 2018 19:51:17 GMT
Ok Thx heXpod ! Humm a lot of change in the setup ! Don’t know if I will proceed to this update ! And what about your plugin key ? If i use the .exe will need a key ? I’m not sure I will test the 3.5 again. Greetings No, the key remain the same. :-) Contact me per email if you have any issues.
|
|
|
Post by vicpopo on Dec 28, 2018 16:24:39 GMT
Hi HeXpod ,
Into the package available from thanos website inside the archive that is your soft indicated in 2.3 release . Is it ok or you made a new release ? Thanks !
|
|
|
Post by hexpod on Dec 29, 2018 1:49:00 GMT
Hi HeXpod , Into the package available from thanos website inside the archive that is your soft indicated in 2.3 release . Is it ok or you made a new release ? Thanks ! For the consistency please take the 2.4 from: heXpod.xyz
|
|
|
Post by Markus on Jan 27, 2019 21:17:41 GMT
Hi Thanos
I got my AMC1280 in March 2015. Is this firmware update also for this one?
Thanks and best regards, Markus
|
|
tony
New Member
Posts: 23
|
Post by tony on Feb 15, 2019 16:28:21 GMT
I see in the drop box a version 3.5.1b hex file and a version 3.5.1a in the 7z file. Are we supposed to update to 1b??? What is different?
|
|
|
Post by buzzman on May 31, 2019 19:47:49 GMT
Bought the controller. Doesn't work. No support. Don't expect an answer to this post either.
|
|
|
Post by tronicgr on Jun 1, 2019 21:37:58 GMT
Bought the controller. Doesn't work. No support. Don't expect an answer to this post either. Hi, I'm sorry, I cannot track all these forums at once. Have been busy with life and providing improvements and fixes for the AMC controllers as much as I can. If its something urgent you can contact me directly, either via email or via Tindie... Thanks Thanos PS. I thougt people would appreciate the amount of work put in to support real AC servomotors directly on the AMC1280USB: motionsim.blogspot.com/2019/05/new-firmware-for-easy-aasd-15a.html
|
|