Post by billo2404 on Dec 8, 2018 0:04:46 GMT
Hi guys, after a long update of the sim done in his free time I'm very happy with the improvements arrived with the new firmware and with the plugin of hexpod and simtools.
But now I find a problem that did not happen to me before:
Also keeping the acceleration and deceleration ramps very high and low P the inverters that support the greater weight (the front ones) often go to the alarm and stop.
my inverter is OMRON 3G3MV-A2007
When I bought them the seller told me that it was a 220-phase three-phase inverter but could be used safely even at 220 single-phase.
The error message is 'U_U'
Do you think the problem can be solved by feeding a 220-phase or is another the reason for the problem?
I am attaching the manual if you want to give it a look
www.fa.omron.com.cn/data_pdf/closed/mnu/i527-e1-06_3g3mv.pdf?id=77
Thanks in advance
Salve ragazzi, dopo un lungo aggiornamento del sim fatto nel tempo libero sono molto felice delle migliorie arrivate con il nuovo firmware e con il plugin di hexpod e simtools.
Ora però riscontro un problema che non mi capitava prima:
Anche tenendo le rampe di accellerazione e decellerazione molto alte e P basso gli inverter che sostengono il maggiore peso (quelli anteriori) vanno spesso i allarme e si fermano.
il mio inverter è OMRON 3G3MV-A2007
Quando li ho acquistati il venditore mi ha detto che si trattava di inverter 220 trifase ma potevano essere utilizzati tranquillamente anche a 220 monofase.
Il messaggio di errore è "U_U"
Secondo voi il problema si può risolvere alimentando a 220 trifase o è un altro il motivo del problema?
Vi allego il manuale se volete dargli un occhiata
grazie in anticipo
But now I find a problem that did not happen to me before:
Also keeping the acceleration and deceleration ramps very high and low P the inverters that support the greater weight (the front ones) often go to the alarm and stop.
my inverter is OMRON 3G3MV-A2007
When I bought them the seller told me that it was a 220-phase three-phase inverter but could be used safely even at 220 single-phase.
The error message is 'U_U'
Do you think the problem can be solved by feeding a 220-phase or is another the reason for the problem?
I am attaching the manual if you want to give it a look
www.fa.omron.com.cn/data_pdf/closed/mnu/i527-e1-06_3g3mv.pdf?id=77
Thanks in advance
Salve ragazzi, dopo un lungo aggiornamento del sim fatto nel tempo libero sono molto felice delle migliorie arrivate con il nuovo firmware e con il plugin di hexpod e simtools.
Ora però riscontro un problema che non mi capitava prima:
Anche tenendo le rampe di accellerazione e decellerazione molto alte e P basso gli inverter che sostengono il maggiore peso (quelli anteriori) vanno spesso i allarme e si fermano.
il mio inverter è OMRON 3G3MV-A2007
Quando li ho acquistati il venditore mi ha detto che si trattava di inverter 220 trifase ma potevano essere utilizzati tranquillamente anche a 220 monofase.
Il messaggio di errore è "U_U"
Secondo voi il problema si può risolvere alimentando a 220 trifase o è un altro il motivo del problema?
Vi allego il manuale se volete dargli un occhiata
grazie in anticipo