thanks for your answer. My hope was to get answers from the people who has experience with such projects. Sorry I didn’t get answers back when I wrote a PN dirctly to a user. The other thing is, if we do all with PN nobody knows about the feedback. Three for I prefers this threads to communicate. The problem is almost a few people like you give feedback. At the moment I’m not sure what is wrong? In between I contacted Hitachi directly. The answer I got frustrated me really and I’m not sure what should I do now?
Hitachi recommended: Set A044 to 00, F002, F003 increase drastically and wire the motors from star to triangle. WJ200-007-SF has only 230V on the output side and forget all the H020 to H024 parameters ...
I didn’t found a tread which recommended this. Now what is to do
If Stevant you read this please give us an answer if you can. I just say help, help help …
after almost a month are there some news to my questions? I'd like to go on with my project but I don't know how. Is there somebody who has experience with the WJ200-007SF? Which parameters have I to change and which are the right ones?
Thanks for help Johann
Sorry for the delay, I have been super busy with kickstarter fulfilment, and deadlines on my day job. My emails were delayed to be answered and had very little time to even visit here.
As Hexpod said, go through the forum of Steveant to see what he has set on his platform, or even try to contact him:
I've red almost all of the threads about the WJ200 descriptions. Also all 23 pages of Stevants thread. I didn’t found an answers to my questions. There for I’m calling for help. What about the Htachi answer? Have you Stevats mail? You can send me a PM if you want to do it here. It seems he isn’t often inside this forum because he didn’t answer. Do you know people who have experience with WJ200-007-SF? Especially with H020 to H024 values.
dureiken: Hi there, it's really quiet here someone could help me for my 6 dof project ? thanks a lot
Aug 8, 2017 15:34:46 GMT
tronicgr: dureiken Hi, Open a thread and I'll try my best to help. A little busy with Kickstarter details at the moment but I'll see what I can do.
Aug 12, 2017 11:57:42 GMT
dureiken74: I just did it
Aug 27, 2017 11:59:06 GMT
fimmy: How's the firmware going?
Sept 6, 2017 8:34:43 GMT
tronicgr: @fimmy I had to put it on hold to finalize the manufacturing of the new kickstarter controllers. I tested parts of it to ensure compliance with the new features and looks good so far. I'll get back to it soon for integration.
Sept 9, 2017 12:52:35 GMT
Theuns: Very nice design.I'm also busy with mine and changing it also to Linear Actuators with 220v Servo motors.I'm waiting for my new controllers from Thanos. If I may ask Do you have any Sketchup files of your design and willing to share it I Thanks Theuns
Sept 14, 2017 22:45:09 GMT
atayeu: Hey everyone! I'm reading up and gathering all of the intel I can find for my first motion platform. this is by far best information for creating one.
Oct 14, 2017 7:25:57 GMT
tmcnam: I must be crazy but I still can't find the blueprints to the platform by GA-Dawg. Any help would be appreciated. Thanks guys.
Mar 10, 2019 21:31:57 GMT
Trip Rodriguez: Sorry tmcnam, the shoutbox doesn't get much attention. Did you find the blueprints? They are at the VERY bottom of the extremely long first post. It says "attachments: 6DOF.zip
May 4, 2019 19:13:25 GMT
zivby: How much weight this setup can carry?
May 19, 2019 11:57:16 GMT