asaf
New Member
Posts: 26
|
Post by asaf on Apr 5, 2017 16:06:09 GMT
Hi, i have a thanos board and i am starting to build the frame. Is there a way to set the "front" direction of the platform or is it set ?
|
|
|
Post by paulg100 on Apr 6, 2017 5:37:44 GMT
If your planning on using bff then it is pre-configured for 1 direction or you can invert the axis to switch it around to opposite direction. See the BFF documentation for the diagram.
|
|
asaf
New Member
Posts: 26
|
Post by asaf on Apr 6, 2017 14:14:52 GMT
Thank you, I am using xsim Where is the front direction on the Amc128usb ? (or, between which motors ??)
|
|
|
Post by paulg100 on Apr 7, 2017 5:34:43 GMT
there is no "front" direction on the amc its controlled by the software. I never used xsim so someone else will have to help with that.
|
|
|
Post by tronicgr on Apr 9, 2017 15:41:39 GMT
You can setup the order of actuators like this: And then reverse the direction of axis output on the motion software (Ian's BFF or X-sim or Simtools). This will make the platform move as if the front of the platform is on the read depicted above. Thanks Thanos
|
|