|
Post by happytriger2000 on May 26, 2016 6:26:47 GMT
|
|
|
Post by tronicgr on May 26, 2016 10:22:29 GMT
Hi,
Please use external 5v power supply to power the servos on the pollution card. The 5v on the amc1280usb do not have enough current for motors.
Second,you can use the 6DOF plug in for xsim, no need to use USO
Did you place a jumper on S2 to activate the pololu servo mode?
Thanks Thanos
|
|
|
Post by happytriger2000 on May 26, 2016 16:58:35 GMT
Hi Thanos, Ok I will swap power supply to an external one. Yes, the jumper is at S2. I'm not quite sure which is the 6dof plugin for Xsim and USO, please provide guidance,
Thanks,
|
|
|
Post by happytriger2000 on May 26, 2016 17:05:26 GMT
Hi again, From this link: motionsim.blogspot.tw/p/projects.html?m=1"You can use the x-sim3 6DOF plugin for testing the platform. It will autodetect the AMC1280USB port and you can select "run hardware" to manually test the motors using the sliders." Some image of that screenshot would very helpful, Thanks,
|
|
|
Post by happytriger2000 on May 27, 2016 8:43:17 GMT
Ok, I have powered the Servo with an external PSU, S2 is jumpered. How do I call out the "Thanos Stewart platform control software"?
THX
|
|
|
Post by happytriger2000 on May 27, 2016 8:49:29 GMT
|
|