can anyone tell us how to measure base ratio, platform ratio, height and servo arm in the design tab?
Hello...
I don´t understand the Design Plugin.. I hope Thanos can help us with a new plugin.
Exist software that we can use to understand the Size/Design of platform, is using this simulator --> in
mememememe* You need to download the 32bits
Processing software and install the library: peasycam
, controlP5
, oscP5
* Download and open the
Platform.pde with the processing.
We have some parameters to adjust the platform, in mm :
// REAL MEASUREMENTS
A
private final float SCALE_INITIAL_HEIGHT = 312;
B
private final float SCALE_BASE_RADIUS = 400;
C
private final float SCALE_PLATFORM_RADIUS = 300;
D
private final float SCALE_HORN_LENGTH = 70;
E
private final float SCALE_LEG_LENGTH = 400;
This Values can be understood like this image. The circle colors
But, now i´m studding how to convert this to Thanos Plugin Design. Thanos informed the values are in mm. But if i insert my values in Design plugin, the 3D viewer are not real, i think it´s have bug in scale.
My best configuration at now, are divide the real size by 2. So my Height are represented by the letter A with 312mm. In plugin i set the value of Height to 153 and the Servo arm to 35.
***Thanos, maybe you can use these maths and calc of memememe simulator, to your plugin.